Adjustable High Speed Homogenizer Lab Disperser Emulsifier 8000~22000rpm 110V

Brief introduction
The instrument adopts a high speed thyristor control system, and the Hall element speed measurement adopts advanced electronic circuit. The digital display is clear and the use is convenient.
It adopts internal suction homogenate structure (internal cutting tool) with high speed. It can be used to homogenize, emulsify and extract trace organic compounds, lipid solutes and soluble organic solvents in water between two immiscible liquids.
All kinds of animal and plant tissues can be homogenized and mixed.
It can break cell membranes to separate and break DNA strands into small molecules at different speeds.
It can be used as agitator at low speed, speed digital display and intuitive reading.
 
Technical parameters
Motor speed: 8000-22000 rpm
Rated power: 260W
Rated voltage: 110V (if you need 220V, pls contact us)
Rated frequency: 60Hz
Adjustment system: knob
Working head size:
1212G: 12mm diameter 120mm length
1218G: 18mm diameter 120mm length
Processing capacity: 5ml-1000ml
Weight: 7Kg
Dimensions: 27x17x40cm
 
Instrument use
1. The instrument should be placed on a horizontal working table. The required homogenizing cutter must be in place. When connecting the power supply to the test machine, the plum cutter head should be submerged in water with a cup or utensil filled with water.
2. The power switch should be turned on, the speed knob should be adjusted slowly to quickly, and there is no obvious metal friction sound (such as metal friction sound, power off, loosening the 6M/M support screw of the cutter, and fixing the jacket). Random steering is installed in place, then tightened) before it can work.
3. Cut the plants or microorganisms that need to be tested into small pieces or pieces, place them in randomly equipped glassware, clamp them in the middle of magnet bracket (heptaglyph), loosen the 8M/M fastening screw of fixed motor base, and slowly move down the opening of the utensil, so that the homogenizing head is 2-3mm away from the bottom of the utensil, and tighten the 8M/M screw.
 
Instrument maintenance:
After long-teruse, PTFE in the tool of high-speed disperser is a vulnerable part for users to replace.
Note: After each work, remove the tool and rinse it with clean water to dry.


*There are options for walk-in purchases.
*We always try to keep the item in stock all the time.
=========================================
 
Contact Information:
 
Balakong:
017-3691406,inquiry.kasb@gmail.com
017-3691038,inquiry.kasb@gmail.com
603-89623888   
603-89617328
 
Setapak:  
016-6616801(whatsapp)  
016-6613186(whatsapp), inquiry.kasb@gmail.com
012-9380198, inquiry.kasb@gmail.com
603-40219399  
        
Gombak:
603-40318686(whatsapp)
016-7166820, inquiry.kasb@gmail.com
016-6616081, inquiry.kasb@gmail.com
 
Titiwangsa:
012-9380198, inquiry.kasb@gmail.com
603-40319292
 
Kajang:
016-6613186(whatsapp) Tel:017-3691038
 
Knight Auto Sdn Bhd (Since 1999)(476359-M)  
A Wholly-Owned Subsidiary of Lim Seong Hai Capital Berhad
http://www.knightauto.com.my
=========================================